MagTek P-SERIES USB - Manual (Page 14)

P-Series USB Insertion Reader
6
Figure 2-2. Cabling for 21065148 and 21065151
The 5-pin USB mini-B connector pin numbers and signal descriptions shown in the illustration
are listed in Table 2-1.
Table 2-2. 5-Pin USB Mini-B Connector (J1)
Pin Number Signal Cable Color
1 V
BUS
Red
2 - Data White
3 +Data Green
4 n/c - -
5 Ground Black
WINDOWS PLUG AND PLAY SETUP
On hosts with the Windows operating system, the first time the reader is plugged into a specific
USB port, Windows will pop up a dialog box, which will guide you through the process of
installing a device driver for the reader. After this process is completed once, Windows will no
longer request this process as long as the reader is plugged into the same USB port. The device
driver that Windows will install for this reader is the driver used for HID devices and it is part of
the Windows operating system. When the dialog box pops up, follow the instructions given to
you in the dialog box. Sometimes Windows will find all the files it needs on its own without
giving you any prompts. Other times Windows will need to know the location of the files it
needs. If Windows prompts you for the file locations, insert the CD that was used to install
Windows on your PC and point Windows to the root directory of the CD. Windows should find
all the files it needs there.