MagTek P-SERIES USB - Manual (Page 64)

P-Series USB Insertion Reader
56
SAVE CUSTOM KEYMAP COMMAND
Command number:
5
Description: This command is used to save the active key map as the custom key map
in non volatile memory. The active key map is determined by the active
key map property. Once a key map item is modified, the changes take
affect immediately. However, the changes will be lost if the device is
reset or power cycled. To make the changes permanent, the save custom
key map command must be issued. To use the new custom key map after
a reset or power cycle, the active key map property must be set to custom.
Data structure:
Request Data: None
Response Data: None
Result codes: 0 (success)
Example Request (Hex):
Cmd Num Data Len Data
05 00
Example Response (Hex):
Result Code Data Len Data
00 00