P022 terminating char, P02a hardware track mapping – MagTek MINIWEDGE SWIPE READER User Manual
Page 24
MiniWedge Swipe Reader
18
NBR 0 – Send numbers (top of keyboard)
1 – Send numeric keypad
LC
0 – Send card data as upper case
1 – Send card data as lower case
Er
00 – Don’t send any card data if error
01 – Don’t send track data if error
11 – Send ‘E’ for each track error
Default: 0x63 = send SS and ES, all upper case, send [SS]E[ES] for each track error.
P022 Terminating Char
mod
c c c c c c c
mod
0 – Send c after card data
1 – Send c after each track
c
1-127 – 7 bit ASCII char code
0 – send nothing
Note: 0x80 sends a "NUL" as ^@.
Default: 0x0D = Carriage return at the end of full card message.
P02A Hardware Track Mapping
In some cases, it may be desirable to read a certain track format on a different physical track. The track
mapping parameter allows the electronics to be set so that track 1 data, for example, can be read from the
track 2 position. The table below indicates how the tracks can be mapped.
Hardware track
1
2
3
Map value
0 1
2
3
1 3
2
1
2 2
1
3
3 1
3
2
4 2
3
1
5 3
1
2