Horner APG RCX HE500RCX404 - Manual

MAN0504-02 23 MAY 2003 PAGE 1
OCX404
24VDC Bipolar Digital In
10-28VDC, 0.5A Sourcing Digital Out
±10V, ±20mA Analog In/Out
HE500OCX404 /
HE500RCX404
Mini OCX/RCX
1 SPECIFICATIONS
ANALOG
INPUT
Number of Channels 4
Analog Inputs
Input Points Required
4
Input Ranges
±10 VDC
±20 mA
Conversion Time
(PLC Update Rate)
Set by PLC Scan Time
Resolution 12-Bit Converter Type
Successive
Approximation
Input Impedance
±10 VDC 1 M Ω
±20 mA 100 Ω , Clamped
@ 12VDC, 35mA Max.
Continuous
Additional error for
temperatures other than
25
°C
0.01% / °C
Maximum Error at
25
°C
0.3% Maximum Over-Current 35mA
DIGITAL INPUT
Inputs per Module 16 Input Characteristics Bidirectional
Isolated Commons
per Module
3 Input Impedance 10K Ohms
Input Voltage Range 12-24VDC Minimum ON Current 1mA
Peak Voltage 35VDC Max. Maximum OFF Current 200 µA
Isolation
(Between isolated
commons and
Ground)
500VDC OFF to ON Response 1ms.
ON Voltage Level 9VDC
OFF Voltage Level 3VDC
ON to OFF Response 1ms.
ANALOG OUTPUT
Number of Channels
2
Analog Outputs;
Output Points Required
2
Resolution 12 Bit
Output Ranges
±10VDC
±20mA Sourcing
Clamped @ 12VDC
Additional error for
temperatures other than
25
°C
0.01% / °C
Load limits ±10V: 2000 Ω MIN
±20mA: 470 Ω MAX
Output Compliance
Voltage for ±20mA
±10VDC
Maximum Error at 25 °C 0.3%
DIGITAL OUTPUT
Outputs per Module
16
Maximum Inrush Current
per channel 650mA
Load Power Circuits
per Module
2 Minimum Load Current None
Operating Voltage 10 - 30VDC OFF to ON Response 1ms.
Output Type Sourcing / 10K Pull-Down ON to OFF Response 1ms.
Peak Voltage 30VDC Max. Output Characteristics Current Sourcing
Maximum Load
Current per Output
0.5A Max. Output Protection Short Circuit
MAN0504-02
Information is subject to change without notice. Cscape is a trademark of Horner APG, LLC.