Horner APG RCX HE500RCX404 - Manual (Page 8)

PAGE 8 23 MAR 2003 MAN0504-02
OCX404
Information is subject to change without notice. Cscape is a trademark of Horner APG, LLC.
7 INSTALLATION / SAFETY
a. All applicable codes and standards should be followed in the installation of this product.
b. Shielded, twisted-pair wiring should be used for best performance (Analog I/O).
c. Shields may be terminated at the module terminal strip.
d. In severe applications, shields should be tied directly to the ground block within the panel.
e. Use the following wire type or equivalent: Belden 8917, 16 AWG or larger for Digital I/O and Belden
8441 for Analog I/O.
For detailed installation information, refer to Mini Hardware Manual. A handy checklist is provided that
covers panel box layout requirements and minimum clearances.
8 TECHNICAL ASSISTANCE
For assistance, contact Technical Support at the following locations:
North America:
(317) 916-4274
www.heapg.com
Europe:
(+) 353-21-4321-266
www.horner-apg.com