ALESIS QSR 64 - Manual (Page 128)

MIDI Transfer and Storage Operations: Chapter 9
QSR Reference Manual
To send a single Program via MIDI to a different Program number:
➀
Follow steps
➀
through
➂
in the instructions above.
➁
Press [CURSOR
▲
] to advance the cursor to the lower section of the display.
➂
Use the [VALUE] knob to select a Program number to send the Program to.
➃
Press [STORE] to transmit the data out the MIDI Out connector.
The procedure is similar for sending Mixes. Page 5 of the Store function allows you
to send any one of the Mixes. In the case of storing a Mix, you may want to store each
of the Programs used in the Mix. The “SEND ALL TO MIDI” command in Store
mode is an easy shortcut to this (see above).
S
EQUENCE
P
LAYBACK
Sound Bridge allows you to burn Standard MIDI sequence files on to PCMCIA cards.
This allows you to play your own sequences at a live gig without taking your
computer with you. See the Sound Bridge instructions on the QS CD-ROM for
instructions on how to burn sequences to a card. To play back sequences from a
PCMCIA card:
➀
Press and hold the [MIX] button.
➁
Press the [DOWN] button. The display will read:
Play CardA Seq01
<STORE>
➂
Use the Value wheel to choose a sequence from either Card A or B, then press
[STORE].
You can play any of the 50 sequences on a card in slot A by using the [00] through
[40] buttons, and you can play the sequences from the card in slot B by using the [50]
through [90] buttons. For example to play sequence 34 from card B , press [MIX], [80],
then [4]. Remember that if you write a sequence to Card A, using Programs and
wave data from that card, then play it from Slot B, the sequence will still look for its
data in the Card A slot.