ALESIS QSR 64 - Manual (Page 9)

Setting Up: Chapter 1
QSR Reference Manual 8
B ASIC A UDIO H OOKUP
When connecting audio cables and/or turning power on and off, make sure that all devices in
your system are turned off and the volume controls are turned down.
Because the QSR includes extensive signal processing as well as a full complement of
sounds, you can make great sounds with nothing more than an amplifier or a set of
headphones. The QSR has two Main outputs, two Aux outputs, plus a stereo
headphones output. These can provide an amplification system or mixer with several
hookup options:
• Mono. Connect a mono cord from either MAIN output jack to a mono
amplification system or individual mixer input.
• Stereo. Connect two mono cords from the [L] and [R] MAIN output jacks to a
stereo amplification system or two mixer inputs.
• Dual Stereo/Four Individual Outs. Connect two mono cords from the [L] and
[R] MAIN output jacks and two mono cords from the [L] and [R] AUX output
jacks to a dual stereo amplification system, or four mixer inputs.
• Stereo Headphones. Plug a set of high-quality stereo headphones into the
headphones [PHONES] jack on the front panel.
L DIGITAL OUT 48 KHZ IN POWER
9 VAC~
Stereo Amp
AC Receptacle
1/4" Audio Cables
MIDI
IN THRU OUT R
AUX
L R
MAIN
MIDI Keyboard
SERIAL PORT
Computer
Stereo Headphones
Insert into
PHONES
connector on
front panel
MIDI Cable Serial Cable
Power Supply
✪