Flytec 4010 * - Manual (Page 14)

Operating Instructions FLYTEC 4010 13
Descent tone/Descent alarm
The descent tone is a continuous tone dependent on descent which sounds as soon as des-
cent is greater than the response point. The descent tone can be set or switched off with the
key. When the descent tone is active, the SINK indicator is displayed. When the descent
tone is first switched on, a mark appears in the bar display indicating the response point set.
Descent alarm setting mode
The response point of the descent alarm is set in
the bar display using the keys. The response point
can be set over the entire range of the display and
also remains stored in memory after the instrument
has been switched off.
PRINT
SET-MODE
Set Descent alarm
SINK
SINK
SINK 4 Sec.