Flytec 4010 * - Manual (Page 16)

Option mode of the speedometer
At the first level, you have a choice of whether the
time should be displayed automatically every 30
seconds when the speed display is switched on.
At the second level, the desired unit of the speed
display is set. You can choose between kilometers
per hour (kph), miles per hour (mph) and knots
(kts) by using the key and the key.
At the third level, you can also make adjustments
to the correction of the speedometer. The correc-
tion value is given in percent using the key and
the key. If the speed display is uncorrected, the
display will show 100 (%). If the display still shows
a 4% excessively high value (e.g. 50 kph instead
of 48 kph), the display is corrected by setting 96
(%). This means that the display will now always
show 96% of the original speed.
Operating Instructions FLYTEC 4010 15
START - STOP
RESET
CLEAR ALT 2
SET-MODE
stallalarm
OPTION-MODE
Display
• SPEED & TIME
• SPEED
Units
kmh-mph-kts
SPEED correction
50..100..150
SPEED
SPEED
SPEED 4 Sec.
OPTION
OPTION
➀
➁
➂