iPazzPort KP-810-19R/19VR - Manual (Page 12)

Code Search
If your product does not respond after you have tried all the codes for
your brand, or if your brand is not listed,try searching for your code by
following these steps.
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on,
then release the SETUP button.
3. Press and quickly release the desired mode button (TV, VCR, etc.).
The red indicator blinks off once.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until
the device to be controlled changes channel. The red indicator blinks
off with each button press. If you accidentally overshoot the code
required, press the CHANNEL DOWN button to backtrack through
the library until the device changes channel. Pressing CHANNEL
UP changes direction to forward again.
5. Press and release MUTE to install the code.Most users will store
VCR codes under the VCR button,Cable codes under CABLE, etc.
If (for example) you want to store a VCR code under CABLE, first
follow the procedure for Direct Code Entry (previous page) and press
CABLE in step 2 of Direct Code Entry, then enter ANY VCR code in
step 3 of Direct Code Entry. The follow the steps above for Code
Search (or Brand Search, below). Note: If the device does not have
a CHANNEL UP button, use PLAY (VCR only) or POWER instead.
Code Search starts from the currently stored 4 digit number under
that mode.
Code Search by Brand
Lets you search for a code for a specific Brand within the Code Library
for a particular manufacturer.
1. Turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator remains on,
then release SETUP button.
3. Press and quickly release the desired mode button (TV, VCR, etc.).
The red indicator blinks off once.
4. Press and release the numeric button (0-9) corresponding to desired
Manufacturer (see table on code list sheet). The red indicator blinks
off once.Note, pressing “0” performs a full library search same as
normal Code Search Method on previous page.