Campbell Scientific CS110 Electric Field Meter User Manual
Page 40
CS110 Electric Field Meter
If the connection is made and the stations time shows up in the window, you
can then select the “Numeric:” button and add the desired public variables to
see electric field readings updated every measurement interval.
If you have changed the CR1000’s PakBus address and subsequently forgotten
it, you can download from http://www.campbellsci.com/downloads at no cost,
a software package named Device Configuration Utility that will discover the
PakBus address. Run the software and set it up with device type set to
CR1000, specify the correct COM port, and select “Connect” and the software
will discover the PakBus address for you.
If necessary, this software is also used to send a new operating system (OS) to
the CR1000.
The following screen captures show the Device Configuration software.
32