Campbell Scientific CSIOPC Software - Manual (Page 16)

CSIOPCServer
6.3.2.11 Last Data Coll
Type: stamp
Applies to: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X, CR10T,
CR10X-TD, CR510T, CR23X-TD, CR9000, CR5000, CR10X-PB,
CR510-PB, CR23X-PB, CR200 Series, CR800, CR1000, CR3000
Description: The server time when the last data collection took place for the
datalogger. This statistic will be updated after a manual poll or scheduled
data collection succeeds or partially succeeds (brings in some data from
some areas but not all data from all selected areas).
6.3.2.12 Next Data Coll
Type: stamp
Applies to: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X, CR10T,
CR10X-TD, CR510T, CR23X-TD, CR9000, CR5000, CR10X-PB,
CR510-PB, CR23X-PB, CR200 Series, CR800, CR1000, CR3000
Description: The server time when the next polling event will take place for
the datalogger for the currently active schedule.
6.3.2.13 Last Coll Attempt
Type: stamp
Applies to: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X, CR10T,
CR10X-TD, CR510T, CR23X-TD, CR9000, CR5000, CR10X-PB,
CR510-PB, CR23X-PB, CR205, CR210, CR215, CR1000
Description: Describes the last time data collection (manual poll or scheduled
collection) was started for this device.
6.3.2.14 Coll State
Type: enumeration
Applies to: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X, CR10T,
CR10X-TD, CR510T, CR23X-TD, CR9000, CR5000, CR10X-PB,
CR510-PB, CR23X-PB, CR200 Series, CR800, CR1000, CR3000
Description: The current state of scheduled collection for the datalogger. The
following values are defined:
1. normal - The normal collection schedule is active.
2. primary - The primary retry schedule is active.
3. secondary - The secondary retry schedule is active.
4. schedule off - The collection schedule is disabled.
10