Campbell Scientific CSIOPC Software - Manual (Page 21)

CSIOPCServer
6.3.2.32 Lith Batt Volt
Type: float
Applies to: CR10X, CR500, CR510, CR23X
Description: Reports the lithium battery voltage on classic dataloggers. This
value is extracted from the results of the “A” command.
6.3.2.33 Table Defs State
Type: enumeration
Applies to: CR10T, CR10X-TD, CR510T, CR23X-TD, CR9000, CR5000,
CR10X-PB, CR510-PB, CR23XPB, CR200 Series, CR800, CR1000,
CR300
Description: Relates the current state of cached table definitions for a table
based (BMP1, BMP3, or BMP5) datalogger. The following values are
defined:
1. none - No table definitions have been received from the datalogger.
2. current – The server’s table definitions are believed to be current for
the datalogger.
3. suspect – A collection attempt has returned an invalid table
definitions code. The server needs to verify the table definitions for
the logger.
4. getting – Indicates that the server is currently trying to get the table
definitions from the datalogger
5. invalid – The table definitions are known to be invalid and need to be
manually refreshed before collection can continue.
6.3.3 Server Statistics
The statistics relating to the host machine for the server or to the operation of
the server as a whole can be found in a the table named
“__LgrNet____controller__”. These statistics are updated every ten seconds.
There is only one row defined for the table. The statistics available in this table
are as follows:
6.3.3.1 Disc Space Avail
Type: int8
Description: Relates how many bytes are free on the volume where the
server’s working directory resides.
15