Campbell Scientific CSIOPC Software - Manual (Page 20)

CSIOPCServer
6.3.2.27 Prog Overrun
Type: uint4
Applies to: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X
Description: Relates the number of datalogger program overruns that have
occurred since the last reset as given in the classic datalogger’s response
to the “A” command.
6.3.2.28 Mem Code
Type: uint4
Applies to: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X
Description: Relates the memory size code as given by the classic
datalogger’s response to the “A” command.
6.3.2.29 Coll Retries
Type: uint4
Applies to: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X, CR10T,
CR10X-TD, CR510T, CR23X-TD, CR9000, CR5000, CR10X-PB,
CR510-PB, CR23X-PB, CR205, CR210, CR215, CR1000
Description: Reports the number of collection retries that the datalogger
device has had since the first collection error occurred. This statistic is
reset to zero when the logger returns to a normal collection state.
6.3.2.30 Low Volt Stopped
Type: uint4
Applies to: CR10X, CR500, CR510, CR23X
Description: Reports the number of times that a classic datalogger has shut
itself down because its supply voltage has been too low. This information
is read from the “A” command results.
6.3.2.31 Low 5v
Type: uint4
Applies to: CR23X
Description: Reports the number of times that the CR23X +5 volt supply has
been reported below five volts. This information is read from the “A”
command results.
14