Campbell Scientific LoggerNet-SDK Software Development Kit - Manual (Page 113)

Section 17. CsiDatalogger Control Reference
Enumeration Name Value Description
co_outcome_invalid_device_name 9 Indicates that the device named by
loggerName was not found in the broker
map
co_outcome_unsupported 10 Indicates that the device “loggerName”
does not support this transaction
co_outcome_cancelled 11 Indicates that a previous clock check or
set command was cancelled successfully
co_outcome_device_busy 12 Indicates the datalogger is busy with
another transaction
COM Return Values
Table of Possible Values
Code Meaning
S_OK Success: Normal return
Datalogger_onLoggerConnectFailure()
Name
onLoggerConnectFailure(logger_failure_type fail_code)
Description
This event indicates there was an error when making an persistent connection
with the specified datalogger.
Parameter
Table of fail_code values.
Enumeration Name Value Description
lf_failure_unknown 0 Indicates that an error has occurred but its
nature is unknown
lf_failure_unexpected 1 Indicates than an unexpected error has
occurred
lf_failure_connection_failed 2 Indicates that the connection failed. This
can happen if a connection has been
successfully established but then lost or an
invalid serverName or serverHostPort
property value was specified. This type of
failure can also occur if the IP stack on the
server host or on the host for this
application is not configured correctly.
17-15