A.2.31 low five volts error count, A.2.32 lithium battery voltage, A.2.33 table definitions state – Campbell Scientific LoggerNet-SDK Software Development Kit User Manual
Page 175: A.3 server statistics
Appendix A. Server and Device Operational Statistics Tables
A.2.31 Low Five Volts Error Count
Column Name: “Low_5v”
Column Definition Description: “Low 5v”
Type: uint4
Applies To: CR23X
Description: Reports the number of times the CR23X +5 volt supply has been
reported below five volts. This information is read from the “A” command
result.
A.2.32 Lithium Battery Voltage
Column Name: “Lith_Batt_Volt”
Column Definition Description: “Lith Batt Volt”
Type: Float
Applies To: CR10X, CR500, CR510, CR23X
Description: Reports the lithium battery voltage on mixed-array dataloggers.
This value is extracted from the results of the “A” command.
A.2.33 Table Definitions State
Column Name: “TableDefState”
Column Definition Description: “Table Defs State”
Type: Enumeration
Applies To: CR10T, CR10X-TD, CR510-TD, CR23X-TD, CR9000, CR5000,
CR10X-PB, CR510-PB, CR23X-TP, CR205, CR210, CR215, CR1000,
CR3000, CR800, and CR850.
Description: Relays the current state of cached table definitions for a table-
based datalogger. The following values are defined:
1. None – No table definitions have been received from the datalogger.
2. Current – The LoggerNet server’s table definitions are believed to be
current for the datalogger.
3. Suspect – A collection attempt has returned an invalid table
definitions code. The LoggerNet server needs to verify the table
definitions for the datalogger.
4. Getting – Indicates that the LoggerNet server is currently trying to get
the table definitions from the datalogger.
5. Invalid – The table definitions are known to be invalid and the need
to be refreshed before collection can continue.
A.3 Server Statistics
The statistics relating to the host machine for the LoggerNet server or to the
operation of the LoggerNet sever as a whole can be found in the table name
“__LgrNet____controller__”. These statistics are updated every ten seconds.
There is only one row defined for the table. The statistics available in this
table are as follows:
A-9