Campbell Scientific LoggerNet-SDK Software Development Kit - Manual (Page 174)

Appendix A. Server and Device Operational Statistics Tables
A.2.26 Watchdog Err
Column Name: “Watchdog_Timer_Reset Count”
Column Definition Description: “Watchdog Err”
Type: uint4
Applies To: 21X, CR7, CR10, CR10X, CR500, CR510, CR23X
Description: Relays the datalogger watchdog error count as given in the
mixed-array datalogger’s response to the “A” command.
A.2.27 Prog Overrun
Column Name: “Program_Table_Overruns_Count”
Column Definition Description: “Prog Overrun”
Type: uint4
Applies To: 21X, CR7, CR10, CR10X, CR500, CR510, CR23X
Description: Relays the number of datalogger program overruns that have
occurred since the last reset as given in the mixed-array datalogger’s response
to the “A” command.
A.2.28 Mem Code
Column Name: “Memory_Size_Code”
Column Definition Description: “Mem Code”
Type: uint4
Applies To: 21X, CR7, CR10, CR10X, CR500, CR510, CR23X
Description: Relays the memory size code as given by the mixed-array
datalogger’s response to the “A” command.
A.2.29 Collect Retries
Column Name: “Collect_Retries”
Column Definition Description: “Coll Retries”
Type: uint4
Applies To: 21X, CR7X, CR10, CR10X, CR500, CR510, CR23X, CR10T,
CR10X-TD, CR510-TD, CR23X-TD, CR9000, CR5000, CR10X-PB, CR510-
PB, CR23X-TP, CR205, CR210, CR215, CR1000, CR3000, CR800, and
CR850.
Description: Reports the number of collection retries that the datalogger device
has had since the first collection error occurred. This statistic is reset to zero
when the logger returns to a normal collection state.
A.2.30 Low Voltage Stopped Count
Column Name: “Low_Volt_Stopped”
Column Definition Description: “Low Volt Stopped”
Type: uint4
Applies To: CR10X, CR500, CR510, CR23X
Description: Reports the number of times that a mixed-array datalogger has
shut itself down because its supply voltage has been to low. This information
is read from the “A” command.
A-8