Campbell Scientific MD485 RS-485 Multidrop Interface - Manual (Page 31)

Appendix B. RF401 to MD485 Network
3. MD9 EMULATION (POINT-TO-MULTIPOINT)
PC-RF401 ----RF401-PS100 with A100-MD485 ----------MD485-DL1
----------MD485-DL2
LoggerNet Setup
a. Setup:
ComPort_1
MD9Base
MD9Remote
CR10X
MD9Remote_2
CR10X_2
b. ComPort_1 – default settings
c. MD9Base – defaults
d. MD9Remote – Address: “1“
e. MD9Remote_2 – Address: “2“
f. Dataloggers – default settings, schedule collections as desired
FIGURE B-2. LoggerNet RF401 to MD485 MD9 Emulation Setup
B-3