Campbell Scientific PWS100 Present Weather Sensor - Manual (Page 57)

Section 7. Operation
FIGURE 7-7. Delete message menu
7.4.2 Top Menu Option 3 (Set Time and Date)
Choosing option 3 from the SETUP menu brings up the TIME AND DATE
menu (see Figure 7-8). On this menu it is possible to set the time and / or date
for the PWS100. To change the time alone enter it as hh:mm:ss, for example
16:30:00. To change the date alone enter it as yyyy/mm/dd), for example
2007/02/04. To set the time and date simultaneously enter both of these
parameters on the same line, for example 16:30:00 2007/02/04. Leading
zeroes are not required on the values but the colons (:) and forward slashes (/)
are and a space is required between the time and date values.
FIGURE 7-8. Time and date menu
7-21