Campbell Scientific RavenXTG Sierra Wireless Cellular Modem - Manual (Page 20)

RavenXTG GPRS/EDGE Sierra Wireless Cellular Modem
Click on EDGE/HSDPA Group to get the following screen:
For a data account with the I2GOLD APN, enter the APN as shown in the
screen above. The example is for an APN = “I2GOLD”.
Account options prior to the “I2Gold” included a data account with “Feature
Code G821”. An AT&T account with Feature Code G821 is configured for an
Access Point Name (APN) = “internet”. Enter “internet” in the New Value
field for “*NETAPN” and “1,IP,internet” in the New Value field for
+CGDCONT.
After the template file has been loaded, and the APN entered, click the Write
icon to save the changes in the modem
.
Click the Reset icon to restart the modem. The other ways to reset the modem
are by pressing the reset button on the front of the modem or removing the
power from the modem.
Click the Disconnect icon to terminate communications with the modem.
Unless you Write the commands, the changes made in
New Value will not be sent to the modem. For some
commands unless you Reset the modem, the newly
written values will not take effect. WARNING
14