Avocent Cyclades PM IPDU - Manual (Page 31)

Chapter 3: Accessing the PM IPDU via the Command Line Interface 21
PM42 IPDU commands:
Examples
To set the display of IPDU #2 to inverted mode, enter:
To set the display of IPDU #1 to normal mode, enter:
To set the display of IPDU #3 (PM42) to automatically show the current of each phase every two
seconds, enter:
To view the display status, enter:
exit
The exit command exits the session.
Syntax
exit
Arguments
none
Examples
To exit the current session, enter:
Imanual Push button toggles phase X, Y, Z and then the vector sum of the
three phases
Iauto <cycle_time> Show current every <cycle_time> seconds of phase X, Y, Z and then
the vector sum of the three phases
pm>display 2 180
pm>display 1 0
pm>display 3 Iauto 2
pm>display
pm>exit