Avocent Cyclades PM IPDU - Manual (Page 37)

Chapter 3: Accessing the PM IPDU via the Command Line Interface 27
This command is available to the administrator user only.
Syntax
name <outlet_number> <name>
Arguments
Examples
To name outlet 4 as nowhere, enter:
off
The off command turns an outlet or group of outlets off. This command works on outlets in a PM
IPDU daisy chain.
Syntax
off all|<outlet_string>
Arguments
CAUTION: The “all” argument will turn off all outlets in a PM IPDU or PM IPDU daisy chain.
Examples
To turn all outlets off, enter:
To turn off outlets 2 through 7 (or all outlets except 1 and 10 in a single PM10 IPDU), enter
the following.
<outlet number> Outlet number, such as “5”
<name> Desired outlet name
pm>name 4 nowhere
all Turns off all outlets in the PM IPDU or PM IPDU daisy chain
<outlet_string> Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
pm>off all
pm>off 2-9