Samsung SC-D382-XAA - Manual (Page 62)

54_ English
advanced recording
USing the tele macro (macro)
Tele Macro function works in both Camera and M.Cam mode. ➥ page 18
Effective focal distance in Tele Macro mode is 50 cm (19.7 inches) to 100 cm
(39.4 inches).
1. Set the Select switch to CArD or TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select "Camera", then press the
Joystick or move the Joystick () to the right.
5. Move the Joystick (▲ / ▼) up or down to select "Macro", then press the
Joystick.
6. To activate the Macro function, move the Joystick (▲ / ▼) up or down to select
"On", then press the Joystick.
If you do not want to use the Macro function, set the "Macro" menu to "Off".
7. To exit, press the MENU button.
Tele Macro ( ) indicator is displayed.
When recording in Tele Macro mode, the focus speed may be slow.
When you operate the zoom function in the Tele Macro mode, the recording
subject may be out of focus.
Use a tripod (not supplied) to prevent hand shake in the Tele Macro mode.
Avoid shadows when recording in the Tele Macro mode.
As the distance to the subject decreases, focusing area narrows.
When you can not achieve proper focus, use the Joystick (W/T) or Zoom lever.
•
•
•
•
•
•
•
•
•
•
•
C.Nite 1/30
16BIt S
10Sec
W T
No Tape !
12:00 1.JAN.2008
29
1/50
M
60min
0:00:00 SP
16:9 Wide
STBY
Move Select Exit
White Balance
Visual Effect
16:9 Wide
Macro
DIS
Camera Mode
MENU
Camera
Program AE
Off
✔ On
Move Select Exit
White Balance
Visual Effect
16:9 Wide
Macro
DIS
Camera Mode
MENU
Camera
Program AE � Auto
� Auto
� Off
� On
� Off
� Off
BATT.
CHG
MODE TAPE CARD
(SC-D383/D385 only)