Samsung SC-D382-XAA - Manual (Page 63)

English _ 55
Setting the digital image Stabilizer (diS)
The DIS function works only in Camera mode. ➥ page 18
DIS (Digital Image Stabilizer) is a function that compensates for any shaking
or hand movement while holding the camcorder (within reasonable limits).
It provides more stable pictures when:
- Recording with the zoom
- Recording a small object close-up
- Recording and walking at the same time
- Recording through the window of a vehicle
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select "Camera", then press the
Joystick or move the Joystick () to the right.
5. Move the Joystick (▲ / ▼) up or down to select "DIS", then press the Joystick.
6. To activate the DIS function, move the Joystick (▲ / ▼) up or down to select "On",
then press the Joystick.
If you do not want to use the DIS function, set the "DIS" menu to "Off".
7. To exit, press the MENU button.
DIS ( ) indicator is displayed.
EASY.Q mode automatically sets the "DIS" to "On".
You cannot set the following functions in the DIS mode.
: "Mosaic", "Mirror", "Emboss2", "Pastel1", "Pastel2", "C.Nite",
"Digital Zoom"
Setting the DIS function in 16:9 Wide mode may produce lower quality than in
normal mode.
It is recommended that you deactivate the DIS function when using a tripod.
If you use the DIS function, the picture quality may deteriorate.
•
•
•
•
•
•
•
•
•
•
•
C.Nite 1/30
16BIt
S
10Sec
W T
No Tape !
12:00 1.JAN.2008
29
1/50
M
60min
0:00:10 SP
16:9 Wide
STBY
Move Select Exit
White Balance
Visual Effect
16:9 Wide
Macro
DIS
Camera Mode
MENU
Camera
Program AE
Off
✔ On
Move Select Exit
White Balance
Visual Effect
16:9 Wide
Macro
DIS
Camera Mode
MENU
Camera
Program AE � Auto
� Auto
� Off
� On
� Off
� Off
BATT.
CHG
MODE TAPE CARD
(SC-D383/D385 only)