Samsung SC-D382-XAA - Manual (Page 77)

English _ 69
Connecting to a TV that has no Audio/Video Input Jacks
You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder to your VCR with the Audio/Video cable.
The yellow jack: Video
The white jack: Audio(L) - mono
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Select switch to TAPE.
(SC-D383/D385 only)
4. Press the MODE button to set Player ( ).
5. Turn on both the TV and VCR.
Set the input selector on the VCR to line.
Select the channel reserved for your VCR
on the TV set.
6. Play the tape.
Play back the tape
1. Connect a power source.
2. Insert the tape you wish to play back.
3. Set the Select switch to TAPE. (SC-D383/D385 only)
4. Press the MODE button to set Player ( ).
5. Move the Joystick (/) left or right, find the first position you wish to play back.
6. Press the Joystick.
The images you recorded will appear on the TV after a few seconds.
If a tape reaches its end while being played back, the tape will rewind automatically.
7. To stop the playback, move the Joystick down (▼).
The playback mode (SP/LP) is selected automatically.
If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
•
•
•
•
•
•
•
•
•
•
AV
MODE
DV
POWER
CHG
Audio/Video Cable
Signal flow
TV
VCR
Camcorder
Antenna
AV Jack