Setting the file number (file no.) – Samsung SC-D382-XAA User Manual
Page 83
English _
75
Setting the File nUmber (File no.)
File number setting works only in
M.Cam mode.
➥
page 18
File numbers are given to images in the order they were recorded when they are
stored on the memory card.
File numbers may be set as follows:
-
"Series": When there are existing files, the new image will be named as the
next number in the sequence.
-
"reset": When there are no files stored on the memory card, the file numbering
starts from 0001.
1. Set the Select switch to CArD.
2. Press the MODE button to set Camera ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (
▲
/
▼
)
up or down to select
"Memory", then press the
Joystick.
5. Move the Joystick (
▲
/
▼
)
up or down to select
"File No.", then press the
Joystick.
6. Move the Joystick (
▲
/
▼
)
up or down to select the desired option
"Series"
or
"reset", then press the Joystick.
7. To exit, press the MENU button.
When you set
"File No." to "Series", each file is assigned with a different number so as to avoid duplicating
file names. It is convenient when you want to manage your files on a PC.
•
•
•
•
BATT.
CHG
MODE
TAPE
CARD
Photo Quality
�
Super Fine
Move
Select
Exit
MENU
M.Cam Mode
Memory
File No.
�
Series
Move
Select
Exit
MENU
M.Cam Mode
File No.
Memory
✔
Series
Reset