English _ 59 – Samsung SC-D382-XAA User Manual
Page 67
English _
59
USing the light (light) (Sc-d382/d383/d385 only)
The Light function works only in
Camera and M.Cam mode.
➥
page 18
The Light function enables you to record a subject in a dark place without
compromising colors. For example, you can make a satisfactorily recording of
an outdoor gathering at night when you use this function.
1. Set the Select switch to CArD or TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (
▲
/
▼
)
up or down to select
"Camera", then press the
Joystick or move the Joystick () to the right.
5. Move the Joystick (
▲
/
▼
)
up or down to select
"Light", then press the Joystick.
6. Move the Joystick (
▲
/
▼
)
up or down to select
"On", then press the Joystick.
To cancel the Light function, set the
"Light" menu to "Off".
7. To exit, press the MENU button.
Light (
) indicator will be displayed.
The light can become extremely hot.
Do not touch it while in operation or soon after turning it off, otherwise
serious injury may occur.
Do not place the camcorder into the carrying case immediately after using
the light, since it remains extremely hot for some time.
Do not use near flammable or explosive materials.
•
•
•
•
•
•
•
•
•
•
WArNING
The range of the light is limited. (up to 2m (6.6ft))
C.Nite 1/30
W
T
16:9 Wide
16BIt
S
10Sec
No Tape !
12:00 1.JAN.2008
29
1/50
M
60min
0:00:10
SP
STBY
16:9 Wide
Move
Select
Exit
Digital Zoom
C.Nite
Light
Camera Mode
MENU
BLC
Camera
✔
Off
On
BATT.
CHG
MODE
TAPE
CARD
(SC-D383/D385 only)
Move
Select
Exit
White Balance
Visual Effect
16:9 Wide
Macro
DIS
Camera Mode
MENU
Camera
Program AE
�
Auto
�
Auto
�
Off
�
On
�
Off
�
Off