Samsung SC-D382-XAA - Manual (Page 100)

92_ English
USing USb interFace
Transferring a Digital Image through a USB Connection
The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)
You can transfer a recorded file on a Memory Card to your PC via a USB connection.
If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the
Camcorder.
USB Connection Speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
Windows VISTA - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
Windows System
CPU Intel® Pentium 4™, 2GHz
OS(Operating System) Windows® 2000/XP/VISTA
* Standard installation is recommended.
Operation may not assured if the above OS has been
upgraded.
Memory 512MB
HDD capacity 2GB or more
Resolution 1024 x 768 dots 24bit Color
USB USB2.0 High Speed
USB interface is not supported on Macintosh operating systems.
System requirements mentioned above are recommendations. Even on a system that satisfies the requirements
may not ensure the operation depending on the system.
•
•
•
•
•
•
•
•
USB interface (SC-D383/D385 only)