Samsung LTP468WX-XAA - Manual (Page 32)

30
Connection & Input Source Setup
Connecting a DVD Player
Connecting a DVD Player
Viewing a DVD Title
To Connect Using Component Cable
1
Connect the component cable between the
[Component In1 (Y/Pb/Pr)] or [Component In 2
(Y/Pb/Pr)] terminals on the back of the TV and
the [Component Out] terminals on the back of
the DVD player.
3 Supply power to the TV and the DVD player
after making all the connections.
2
Connect the audio cable between the [Left
(white) -Audio- Right (red)] terminals on the
back of the TV and [Audio Out (white/red)]
terminals on the DVD player.
Turn on your TV, then press the [SOURCE] button
to select <Component1> or <Component2>.
• If <Component1> or <Component2> is unavailable
please check that the component cables are connected
correctly.
Turn on the DVD player and press the [PLAY]
button.
1
2
DVD
Rear Panel of LCD TV
Component Cable Audio Cable
œ
2
1
√
Caution
If Y, Pb, or Pr cables are not connected properly, the
picture will be red or blue or not appear at all.
Note
Depending on the manufacturer, the DVD terminals
may be identified as “Y, PB, PR” or “Y, B-Y, R-Y” or “Y,
CB, CR”.
Note
• If you have connected the video cable to the [Component2] terminal instead of
[Component1], press the [SOURCE] button to select <Component2>.
• Component and audio cables are sold separately.
Component1
1
SOURCE
BN68-00665D-01_22~51 9/1/04 2:34 AM Page 30