Samsung LTP468WX-XAA - Manual (Page 36)

34
Connection & Input Source Setup
Connecting an Amplifier/Home Theater (V
ariable Audio Output)
Connecting an Amplifier/Home Theater (Variable Audio Output)
Use the Monitor Out Audio terminal.
1
Connect the audio cable between the AUDIO
OUT [Left (white) -Audio- Right (red)] terminals
and the DVD Home Theater (or AV Amp) [Audio
In] terminals.
2
Press the [MUTE] button on the remote control
to cut off the sound, then adjust the volume
using the Home Theater (or AV Amp) volume
button.
Amp. DVD Home Theater
Audio Cable
Rear Panel of LCD TV
œ
1
Note
• For connecting speakers to the DVD Home Theater
(or AV Amp) please refer to the instructions provided
by the Amplifier/Home Theater manufacturer.
• In order to enjoy the sound from the Home Theater
(or AV Amp), press the [MUTE] button on the TV
remote control, or press the [Volume] button to
minimize the volume or to cut off the sound from the
TV.
• Once you minimize the volume you can hear the
sound from the Home Theater (or AV Amp).
BN68-00665D-01_22~51 9/1/04 2:34 AM Page 34