Samsung LTP468WX-XAA - Manual (Page 58)

PIP Settings
TV
O
O
O
O
O
O
O
O
O
X
Picture
PIP : Off
Source : TV
Swap
Size
:
Position :
Channel : Air 3
Move Enter Return
Off
On
Picture
Mode : Dynamic √
Custom √
Color Tone : Warm1 √
DNIe : DNIe On √
PIP √
My Color Control √
Dynamic Contrast : Off √
† More
Move Enter Return
Picture-in-Picture Function
Picture-in-Picture Function
56
Setting the Picture
Picture-in-Picture Function
You can use the PIP function to simultaneously watch two video sources.
1 Press the [MENU] button.
The menu will be displayed.
2
Press the […/†] buttons to move to <Picture>, then press
the [ENTER] button.
The <Picture> menu will be displayed.
3
Press the […/†] buttons to move to <PIP>, then press the
[ENTER] button.
The <PIP> menu will be displayed.
Press the [ENTER] button to select PIP.
4
Press the […/†] buttons to move to <On>, then press the
[ENTER] button to set the PIP.
The <PIP> is set to <On>.
Select <Off> to deselect the PIP mode.
5
Press the [EXIT] button to finish.
Press the [PIP] button.
Each press of the [PIP] button cycles through <PIP On> and
<PIP Off>.
1
MENU
2,3,4
ENTER
2,3,4
…/†
5
EXIT
Air 3
Air 4
Main Channel
PIP Channel
Main Picture
PIP Picture
Note
• While the PIP is in
operation, the size of the
main picture will change to
Widescreen format.
• If one of the screens is in PC
mode, the SWAP function
will not work.
• Check if the V-Chip Lock
(see to page 93) is On if
the PIP On/Off will not
function. PIP does not
function when the V-Chip
Lock is set to On. Change
the setting to Off and try it
again.
O: PIP Enabled, Swapping Enabled
X: PIP Disabled
Main Picture
PIP
TV
AV1
AV2
S-Video1
S-Video2
Component1
Component2
HDMI
DVI
PC
AV1
O
X
O
O
O
O
O
O
O
X
AV2
O
O
X
O
O
O
O
O
O
X
S-Video1
O
O
O
X
O
O
O
O
O
X
S-Video2
O
O
O
O
X
O
O
O
O
X
Component1
O
O
O
O
O
X
X
O
O
X
Component2
O
O
O
O
O
X
X
O
O
X
HDMI
O
O
O
O
O
O
O
X
X
X
DVI
O
O
O
O
O
O
O
X
X
X
PC
O
O
O
O
O
X
X
O
O
X
BN68-00665D-01_52~73 9/1/04 3:02 AM Page 56