Samsung LTP468WX-XAA - Manual (Page 31)

29
Connection & Input Source Setup
Connecting & V
iewing Satellite TV
1 3
2
4
Connecting & Viewing Satellite TV
Connect the Satellite cable to the Antenna Input
terminal on the back of the Satellite box.
Connect the Audio cable between the [Left
(white) -Audio- Right (red)] terminals on the side
or back of the TV and [Audio Out (white/red)]
terminals on the back of the Satellite box.
Connect the video cable between the [Video 1In
(yellow)] terminal on the back of the TV or the
[Video2 In (yellow)] terminal on the side of the
TV and the [Video Out (yellow)] on the back of
the Satellite box.
Supply power to your TV and the Satellite box
after making all the connections.
OR
S-Video
Cable
Satellite box
Rear Panel of LCD TV
Video Cable
Audio Cable Coaxial Cable
Satellite Antenna
œ
1
œ
3 2
√
Note
For a Satellite box with an S-VIDEO terminal, connect
the S-Video cable between the [S-Video In] on the TV
and [S-Video Out] terminal on the Satellite box.
For connection of the audio cables please follow the
instructions above.
Viewing Satellite TV
Turn your TV on, then press the [SOURCE] button
to select <AV1> or <AV2>.
• If <AV1> or <AV2> is unavailable, please check that the
video cable is connected correctly.
Turn on the Satellite TV and select the channel of
your choice using the Satellite remote control.
1
2
Note
• If you have connected the TV and the VCR using the S-Video cable, press the
[SOURCE] button to select <S-Video1> or <S-Video2>.
• If you have connected the video cable to the [AV2] terminal, select <AV2>.
• Audio and video cables are sold separately.
AV1
1
SOURCE
BN68-00665D-01_22~51 9/1/04 2:34 AM Page 29