Samsung SC-HMX10C-RCL - Manual (Page 107)

99_ English 中文 _ 99
USB
信息 图标 说明内容…… 处理
Fail Printer
Connecting
( 打印机连接
失败 )
-
连接 USB 至打印机时出
现问题。
检查 USB数据线。
按照书中的介绍尝试再次连接。
切换 “USB Connect”(USB 连接)功
能至 “Mass Storage”(海量存储器)
•
•
•
Fail USB
Connecting
(USB 连接失
败 )
-
连接 USB 至电脑时出现
问题。
检查 USB数据线。
按照书中的介绍尝试再次连接。
切换
“USB Connect”(USB 连接)功
能至 “ PictBridge”
•
•
•
Ink Error
( 墨水错误 )
- 墨盒出现问题。
检查墨盒。
给墨盒注墨。 •
•
Paper Error
( 纸张错误 )
- 纸张出现问题。
检查打印机纸张。如果没有放纸，
请放入纸张。 •
File Error
( 文件错误 )
- 文件出现问题。
您的高清数码摄像机不支持此文
件格式。
试着使用您的高清数码摄像机再
次录制。 •
•
Printer Error
( 打印机错误 )
- 打印机出现问题。
将打印机关闭然后再打开。
联系打印机厂商的客服中心。
•
•
Print Error
( 打印错误 )
-
在打印的过程中出现问
题。 在打印的过程中不要拔掉电源或取
出存储卡。 •
当有露水凝结的时候，请在使用前放置一段时间。
什么是露水凝结？
当数码摄像机从一个地方移动到另一个温度明显有差异的地方，就会发生露
水凝结现象。换句话说，空气中的水蒸汽因为温度的差异转变成露水。并且
在数码摄像机镜头的内部和反射镜头，以及与播放相关的光盘表面上凝结
成露水。当发生这种情况时，数码摄像机的录制以及播放功能可能会暂时失
灵。而且，如果有露水凝结的现象时接通电源，很可能导致数码摄像机失灵
或者损坏。
怎样处理呢？
关闭电源并且卸下电池组，在使用数码摄像机之前将其放置于干燥的地方
1~2个小时。
何时会发生露水凝结？
当设备被重新放置回一个温度更高的地方，或是突然在高温地区使用时，会
发生露水凝结。
- 冬天，在室外寒冷的天气中进行录制，然后进入室内使用时。
- 从开着空调的室内或者车内进行录制，然后移动到炎热的室外时。
修理数码摄像机前的注意事项
如果这些说明不能解决问题时，请与最近的三星授权服务中心联系。
根据出现的问题, 当前的硬盘也许需要初始化或更换并且删除数据。
请务必在数码摄像机送出修理之前，将数据备份到硬盘或是其他存储介质
上。三星公司不能保证不会弄丢您数据。
•
•
•
•
•
注意
USB
Message Icon Informs that... Action
Fail Printer
Connecting
-
A problem occurred when
connecting
the camcorder via USB to
a printer.
● Check the USB cable.
● Try again the connecting procedure as we
instructed.
● Switch “USB connect” function to “Mass
Storage.”
Fail USB
Connecting
-
Some problems occur
during connecting USB
interface to PC.
● Check the USB cable.
● Try again the connecting procedure as we
instructed.
● Switch “USB connect” function to
“ PictBridge.”
Ink Error -
There are some problems
with ink cartridge.
● Check the ink cartridge.
● Put the new ink cartridge.
Paper Error -
There are some problems
with the paper.
● Check the paper in the printer. If there is
no paper, insert the paper.
File Error -
There are some problems
with file.
● Your HD camcorder does not support this
file format.
● Try another file recorded on your HD
camcorder
Printer Error -
There are some problems
with printer.
● Turn printer power off and on.
● Contact printer manufacturer service
center.
Print Error -
Some problems occur
during printing.
● Do not remove power source or eject
memory card during printing.
When there is dew condensation, put the camcorder aside for a while before using
● What is dew condensation?
Dew condensation happens when a HD camcorder is moved to a place where there is a
significant temperature difference from the previous place. The Dew condenses on the
external or internal lenses of the HD camcorder, and on the reflection lens. When this
happens, it may cause a malfunction or damage to the HD camcorder when using the
device with the power on while there is dew condensation.
● What can I do?
Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours
before using it.
● When does the dew condensation occur?
When the device is relocated to a place with a higher temperature than the previous
location, or when using it in a hot area suddenly, it will cause condensation.
- When recording outside in cold weather during the winter and then using it indoors.
- When recording outside in hot weather after being indoors or inside a car where the
A/C was running.
Note before sending your camcorder for repair.
● If these instructions do not solve your problem, contact your nearest Samsung
authorised service center.
● Depending on the problem, the built-in memory may need to be initialised or replaced
and the data will be deleted. Be sure to back up the data on your PC before sending your
camcorder for repair.
Samsung cannot guarantee any loss of your data.
CAUTION