Connection – Samsung SC-HMX10C-RCL User Manual

Page 52

Advertising
background image

44_ English

中文

_

44

Connecting to a normal TV (16:9/4:3)

Even if the movie image is recorded in HD quality, it is played back in

SD quality on the normal TV not HDTV.

When playing back the HD-quality (1280x720) movie images on an

SDTV, the images are down-converted to a low quality of 720x480.

The multi-AV cable does not support HD-quality images so it down-

converts them to

SD-quality images.

Before connecting

your HD camcorder

to a TV, set the same

aspect ratio on your

HD camcorder as on

your TV. page 70

Method 1: Tune

the output signal

for TV using the

Component Out

function. page 71

Method 2: When connecting with Multi -AV cable.

If only a mono audio input is available on the TV set, use the audio

cable with the white jack (Audio L).

You may use an S-Video jack on the cable to obtain better quality

images if you have an S-Video jack on your TV.

Even if you use an S-Video jack, you need to connect an audio cable.
When connecting HDMI, component and multi-AV cables at the

same time, the video output priorities are as follows: HDMI output 

Component output  S-Video output  Video output

When connecting your HD camcorder to TV through HDMI, component,

or multi-AV cable, check whether the connections are correctly made.

When inserting/removing the HDMI, component, and multi-AV cables,

do not apply excessive force.

When handling the multi-AV cable and component cable, connect it to

have the same colors connected between the cable connectors and TV

jacks.

It is recommended to use the AC power adaptor as the power source.

When the HD camcorder is connected to a TV, you cannot control the

volume of the TV from the camcorder.

connection

与普通电视机连接

(16:9/4:3)

即使视频图像是以

HD质量录制的,在连接了普通电视时也只能以

SD质量播放。

当在

SD电视机上播放HD质量 (1280x720) 的影音图像时,画面会降

低质量为

720x480。

multi-AV电缆不支持HD画质,因此使用它将会将画质降低为SD画质

的图像。

在将高清数码摄像机

连接至电视机之前,

请将电视机与高清数
码摄像机调整为相同
的高宽比。
第70页

方法

1:将电视

机的输出信号调整为

使用“

Component

Out”(分量输出)功

能。

第

71页

方法

2:通过Multi–AV电缆连接。

如果电视机上仅有一个单音音频输入,请使用音频电缆与白

色接口连接

(AUDIO L) 。

如果您的电视机拥有

S-Video接口,您可以将电缆与

S-Video接口相连以获得更好的图像质量。

即使您使用

S-Video接口,也仍然需要连接音频电缆。

当与HDMI,分量,multi-AV电缆一起连接,视频输出的顺序

是:

HDMI输出

分量输出

S-Video 输出

视频输出。

当您的高清数码摄像机通过

HDMI,分量,或multi-AV电缆与

电视机连接时,请检查连接的方式是否正确。

当插入

/移除HDMI,分量和multi-AV电缆时,不要用力过大。

当使用

multi-AV电缆和分量电缆时,用同样颜色的数据线连接

电视机上同样颜色的接口。

建议您使用交流电源适配器提供电能。
当高清数码摄像机与电视机相连,不能使用摄像机控制音
量。您可以通过电视机控制音量




COMPONENT IN

Y

Pb Pr L

R

AUDIO IN

S-VIDEO IN

L

R

AUDIO IN

VIDEO IN

Method 1

Normal TV

HD camcorder

Signal fl ow

Component cable

COMPONENT IN

Y

Pb Pr L

R

AUDIO IN

S-VIDEO IN

L

R

AUDIO IN

VIDEO IN

Normal TV

HD camcorder

Signal fl ow

Multi-AV cable

Method 2

or

连接

Advertising
This manual is related to the following products: