使用多功能支架 – Samsung SC-HMX10C-RCL User Manual

Page 19

Advertising
background image

11_ English

中文

_

11

如果您将摄像机与提供的多功能支架连
接,并且使用多种类型的电缆连接用来
输出图像,则输出信号的顺序为:

USB数据线

分量

/Multi-AV电缆

不要同时连接多条电缆,这样做可能会
导致冲突,从而不能正常工作。如果发
生此类事情,请将所有连接的电缆拔掉
然后再次尝试连接。

使用多功能支架

多功能支架是一种让摄像机在充电的时候摆放更
加平稳或连接其它外部设备的连接板材 ( 电视、
个人计算机 , 等 )

将钮扣电池存放在孩子触及不到的地方。
万一吞下电池,请立刻咨询医生。

INSTALLING THE BUTTON-TYPE BATTERY

Installing the button-type battery in the remote control

1. Turn the battery holder counterclockwise (as indicated with

() mark) using your fi ngernail or a coin to open it. The

battery holder opens.

2. Insert the battery into the battery holder while the positive

(+) terminal facing down and press it fi rmly until you hear a

locking sound.

3. Place the battery holder back in the remote, match its ()

mark with the () mark on the remote control, and turn the

battery holder clockwise to lock it.

Precautions regarding the button-type battery

There is a danger of explosion if button-type battery

is incorrectly replaced. Replace only with the same or

equivalent type.

Do not pick up the battery using tweezers or other metal

tools. This will cause a short circuit.

Do not recharge, disassemble, heat or immerse the battery

in water to avoid the risk of explosion.

Keep the button-type battery out of the reach of the children.

Should any battery be swallowed, consult a doctor immediately.

USING THE CRADLE

The cradle is a connection plate which can be used

to make the camcorder more stable when charging

the battery, or connecting to an external device (TV,

PC, etc.).

If you connect your HD camcorder to the

provided cradle using more than one type

of cable to output image, the order of

priority of the output signal is as follows:

USB cable  Component /Multi-AV cable.

Do not connect the connection cables

at the same time, it may cause confl ict

and may not work properly. If this occurs,

remove all the connected cables and try

the connection again.

WARNING

安装钮扣电池

安装遥控器内的钮扣电池。
1. 用指甲或硬币向左转动电池舱盖 ( 按照标识的标记

(

))。

2. 电池正面朝下 (+) 插入电池插槽并且轻轻按下直到听

到电池被锁住的声音。

3. 将电池安装在遥控,将遥控器上的标记 (

) 与电池

仓盖上的标记 (

) 对齐,然后顺时针转动电池舱盖

将其锁住。

有关钮扣电池的安全防备措施

如果更换错误的电池的类型会有爆炸的危险。仅可使
用同样或等效型的电池。
不要用镊子或者其它金属工具取放电池。因为这样
做,会导致电池短路。
不要击打,拆卸,加热或者将电池放在水中以免发生
爆炸。

警告

Battery

holder

1

2

3

DC IN jack

USB jack

Component/Multi-AV jack

Cradle

receptacle

Advertising
This manual is related to the following products: