Samsung SC-HMX10C-RCL - Manual (Page 92)

84_ English 中文 _ 84
PictBridge菜单
设置印于照片上的日期/时间
触摸菜单导航
( )  “Date/Time”(日期/时间)  “Off”(关闭) “Date”(日
期) “Time”(时间),或“Date & Time”(日期和时间)  返回导航( )。
使用 DPOF设置打印
如果打印机兼容 DPOF，您可以使用DPOF设置。  第 82页
打印照片图像
PictBridge menu
Setting the date/time imprint option
Touch the Menu ( ) tab  “ Date/Time”  “ Off,” “Date,” “Time”, or “Date &
Time”  Return ( ) tab.
To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting.  page 82
● If the printer is not recognised, or to print again
after direct printing with a PictBridge printer,
remove the USB cable, select “ PictBridge” in the
menu again, and then reconnect the cable.
● If the “USB Connect” menu is set to “Mass
Storage” you cannot connect a PictBridge
compatible printer to the camcorder and a
“Fail USB Connecting” message will appear.
You must touch the “Switch Mode” tab 
“PictBridge” tab on the screen, and the
“Connecting as Printer Mode” message will
appear.
● In some instances the HD camcorder may
not connect to the printer. If connection fails,
disconnect the USB cable and turn off the printer
and back on. Then, connect the USB cable and
set the HD camcorder to “PictBridge.”
● The date/time option may not be supported by all
printers. Check with your printer manufacturer.
The “ Date/Time” menu cannot be set up if the
printer does not support this option.
● PictBridge™ is a registered trademark of CIPA
(Camera & Imaging Products Association), an
image transfer standard developed by Canon,
printing photo images
1 / 1
Off
Date
Time
Date & Time
Date/Time
1 / 1
Date/Time
Fuji, HP, Olympus, Seiko Epson, and Sony.
● Use the USB cable provided with the HD camcorder.
●
Use the AC power adaptor for your HD camcorder during
PictBridge direct printing. Turning your HD camcorder off during
printing might damage data on the storage media.
● Movie images are not available for printing.
● You can set various printing options depending on the printer.
Please refer to the user manual of the printer for details.
● Do not remove USB cable or memory card during printing.
● You may not print photo images recorded on other devices.
并非所有的打印机都支持日期 /时间打印。请查看您的打印机使用说明书。如
果打印机不支持此功能，则 “ Date/Time”(日期/时间)菜单不能设置。
PictBridgeTM是CIPA（Camera & Imaging Products Association），
公司的注册商标，照片传输标准是由 Canon，Fuji，HP，Olympus，
Seiko Epson和Sony所发展的。
使用高清数码摄像机随附的 USB数据线。
在PictBridge直接打印期间，请在您的高清数码摄像机上使用交
流电源适配器。打印期间关闭高清数码摄像机电源可能会损坏存
储卡上的数据。
不能够打印影音图像。
依照打印机的不同，您可以有其他的打印功能。请参考打印机的
操作说明。
在打印期间不要拔掉
USB数据线或取出存储卡。
在其他设备上拍摄的照片图像不能通过本高清数码摄像机打印。
•
•
•
•
•
•
•
•
如果打印机不被认可，或使用
PictBridge打印机直接打印之后再次
打印，请拔掉 USB数据线，在菜单
内再次选择 “ PictBridge”然后再连接
USB数据线。
如果将 “USB Connect”(USB连接)菜
单设置为 “Mass Storage”(海量存储)，
则您不能与 PictBridge兼容的打印机
连接到摄像机，并且将显示 “Fail USB
Connecting” (USB连接失败)消息。
必须触摸屏幕上的 “Switch Mode”(切
换模式) 导航  “ PictBridge”导航，
就会显示“ Connecting as Printer
Mode”(以打印机模式连接)消息。
在某些情况下，高清数码摄像机可能不
能连接到打印机。如果连接失败，则拔
下
USB线，关闭打印机，然后重新打开
打印机。然后，将高清数码摄像机设置
为
“ PictBridge”后连接USB数据线。
•
•
•