Samsung WAM550-ZA - Manual (Page 18)

A
Connecting with a HUB (Not Included)
• If the M5 fails to connect to your network or its network connection operates abnormally,
place the M5 closer to the HUB or your router and try again.
• The M5 is a wireless network device. Its communications with your network may
be disrupted because of the distance between it and other devices on the network,
obstructions, or interference from other wireless devices.
❚ Connecting the M5(s) to Your Network with a HUB (Not Included)
1 Connect a LAN cable to the router and the ETHERNET SWITCH on the back of the
HUB.
NOTE
9 You can connect the LAN cable to any ETHERNET SWITCH Port on the HUB.
2 Attach the HUB's power cord to the power port on the rear of the HUB, and then plug
the power cord into an electrical outlet.
3 The power ( ) and the HUB ( ) indicators on the HUB's front turn on.
When the pairing indicator ( ) begins to flash, plug the M5(s) into an outlet.
The pairing indicator on the M5 starts to flash.
If the HUB's pairing indicator does not flash, press the SPK ADD button on the rear of the
HUB.
NOTE
9
If you are adding multiple M5s, connect all the M5's to electrical outlets. If you are not connecting all
the M5s, refer to pages 36~38.
Press here
4 Wait until the pairing indicator on the M5 stops flashing. If the M5's LED indicator turns
solid blue, pairing is complete. The M5 may also beep.
Connections
VOLUME
ETHERNET
POWER
Wireless Router
LAN Plug In
HUB
Plug In
18
4444