Samsung WAM550-ZA - Manual (Page 19)

NOTES
9 Place each M5 at least 20 inches (50 cm) from the HUB when connecting them to the HUB.
9
Your smart device cannot connect to the M5 or the HUB if there is no wireless router.
9 To confirm you have a proper connection, check the pairing indicator on the front of the HUB.
- When you turn on the HUB for the first time, there is a 20 minute pairing period.
The pairing indicator ( ) will blink for these 20 minutes or until pairing occurs. When you press
the SPK ADD button to pair additional M5s, the pairing period is reduced to 10 minutes. The pairing
indicator ( ) flashes for 10 minutes or until pairing occurs. Turn on the M5 you want to pair while
the pairing indicator is flashing.
- If pairing mode has expired, press the SPK ADD button on the rear of the HUB to turn on pairing
mode again. Then, turn the M5 off and then on or press the SPK ADD button on the rear of the M5
to link the M5 to the HUB.
9
For a proper connection, connect the HUB to your router before turning on the M5.
- Connecting the M5 to the HUB may take a few minutes.
- There will be a brief sound when the connection is established.
5 Connect your smart device to your Wi-Fi network. (The HUB and the smart device should
be connected to the same router.)
6 Download the Samsung Multiroom app from Google Play or App Store of your smart
device.
7 On your smart device, select the Samsung Multiroom app. Setup starts.
8 If the automatic setup fails, run the App again and follow the instructions in the app guide
on your device to connect the M5 and the HUB.
NOTE
9
After pairing is complete, the M5 naming screen appears. Edit the name or enter a name of your own
choosing.
19
4444