Cleaning precautions, Additional information, About nfc (android only) – Samsung WAM550-ZA User Manual

Page 6: About the network connection, A additional information

Advertising
background image

• Do not drop the product. In case of a mechanical breakdown, disconnect the power cord and

contact a Samsung service center.

- There is a risk of fire or electric shock.

• Do not hold or pull the product by the power cord or the signal cable.

- A damaged cable can cause the product to malfunction, cause a fire, and poses a risk of

electric shock.

• Do not use or keep flammable materials near the product.

• If the product emits an abnormal sound or a burnt smell or smokes, unplug the power-cord

immediately and contact a Samsung service center.

• If you smell gas, ventilate the room immediately. Do not touch the power plug of the product.

Do not turn the product off or on.

• Do not strike or subject the product to a sudden shock. Do not pierce the product with a

sharp object.

Cleaning Precautions

• Never use alcohol, solvents, waxes, benzene, thinners, air freshener, or lubricants to clean the

product, or spray insecticide on the product.

- Using any of these materials can discolor the exterior coating or cause it to split or peel off,

or remove the labelling on the product.

• To clean the product, unplug the power cord, and then wipe the product with a clean, dry,

soft cloth (Microfiber, cotton).

- Avoid leaving dust on the product. Dust can scratch its the surface.

A

Additional Information

About NFC (Android only)

• NFC tagging to establish a Bluetooth connection will not work while the product is being

powered on and off.

• NFC tagging to establish a Bluetooth connection will not work while the battery indicator on

the Bluetooth device is blinking.

About the Network Connection

• Depending on the wireless router used, some network operations may perform differently.

• For detailed information on networking with a wireless router or modem, refer to the router's

or modem's documentation.

• Select one wireless channel that is not used currently. If the selected channel is used by

another communication device nearby, radio interference may result in communication failure.

6

44

Advertising