Samsung WAM550-ZA - Manual (Page 36)

A
Adding an M5
• Before adding an M5, unplug all M5s that are connected to the Samsung Multiroom app.
• If you add a new HUB and an extra M5 and connect them to the same wireless router
that an existing M5 is connected to, the existing M5 will disappear from the Samsung
Multiroom app. To re-connect the existing M5, connect it to the newly added HUB.
❚ Adding an extra M5 to a HUB that is connected to an M5
1 Press the SPK ADD button on the back of the HUB.
(The Pairing indicator on the front of the HUB will blink.)
NOTE
9 The pairing indicator ( ) flashes during the pairing mode. You plug in M5 whille the indicator is
flashing.
2 Plug the M5 you are adding into an electrical outlet, and then press the SPK ADD button
on the back of the M5.
When the M5 connects to the HUB, the M5 beeps or sounds, and the M5's LED
indicator stops flashing.
3 On your smart device, select the Samsung Multiroom app. Setup starts.
NOTE
9
After pairing is complete, the M5 naming screen appears. Edit the name or enter a name of your own
choosing.
36
4444