Samsung WAM550-ZA User Manual
Page 38
`
When the M5 in use is connected using WPS or the Wi-Fi Setup method
1
Connect the HUB to your wireless router with a LAN cable, and then plug the HUB's
power cable into an electrical outlet.
2
Plug in the power cable of the new M5. The new M5's blue LED pairing indicator starts
to flash. Wait until the pairing indicator on the M5 stops flashing. When the indicator
stops flashing, pairing is complete. The M5 may also beep.
3
Turn off the old M5 by disconnecting the power cable. Then, connect it again. Press
the
SPK ADD
button the back of the old M5. The old M5's blue LED pairing indicator
starts to flash. Wait until the pairing indicator on the M5 stops flashing.
When the indicator stops flashing, pairing is complete. The M5 may also beep.
4
On your smart device, select the Samsung Multiroom app. Setup starts.
38
4444