Samsung SPH-A513BKASKE - Manual (Page 148)

148
Voice Commands
Launching Voice Commands
To launch Voice Commands, do one of the following:
• In standby mode, press and hold the key.
• In standby mode, press the M ENU (left) soft key
( ), then press (for PLAN), (for
Voice Functions), and for Voice Commands.
After voice-activating your Contacts list, if necessary,
the Say a Command screen appears in the display.
Voice Commands is now ready for use.
Voice-Activating Your Contacts List
When you turn on your device and you first launch Voice Commands, it reads your
Contacts list and voice-activates all the names stored there.
When you add or change contacts, the next time you launch Voice Commands it
automatically re-reads your Contacts list and voice-activates all the names stored
there.
Using Voice Commands
To use Voice Commands, do the following:
1. In standby mode, press and hold the
key to launch Voice Commands.
When the Say a Command screen appears in
the display, “Please say a command” plays
through the earpiece followed by 3 beeps and
the “Listening” indicator appearing at the
bottom of the display.