Samsung SPH-A513BKASKE - Manual (Page 91)

CUSTOMIZE 91
Security
is turned on. With the device in lock mode, you can answer incoming calls, but you
must unlock the device to place outgoing calls (except to emergency numbers).
1. In standby mode, press the M ENU (left) soft key ( ), then press
(for CUSTOMIZE), (for Settings), (for Security), and
for Phone Lock. You’re prompted to enter the password.
Note: The default password is ‘0000’.
2. Enter the Lock Code. The following Phone Lock options pop-up in the
display:
• Manual Lock — Locks the device immediately (The device stays locked until
you enter the lock code.)
• Auto Lock — Locks the device automatically the next time your device is
powered ON (The device stays locked until you enter the lock code.)
• Off — Unlocks the device.
3. Use the navigation keys to highlight the Phone Lock mode option of your
choice.
4. Press the key to perform the function for the highlighted option.
Set Password
The default lock code for your device is generally the last four digits of your phone
number. It is advisable to change the default lock code to a secret code for security
purposes.
1. In standby mode, press the M ENU (left) soft key ( ), then press
(for CUSTOMIZE), (for Settings), (for Security), and
for Set Password. You’re prompted to enter the Password (lock code).
Note: The default password is ‘0000’.
2. Enter the current password. You’re prompted to enter the New Password.
3. Enter the new password. You’re prompted to re-enter the new password
for verification.
4. Enter the new password again. Your changes are stored.
Note: Your device does not allow you to view the password for obvious security reasons. If you change the
password, be sure to write down or memorize the new password.