Samsung SPH-A513BKASKE - Manual (Page 150)

150
Ending Calls Before Restarting Voice Commands
When you use Voice Commands to make a call, you must end that call before you
can use Voice Commands again.
Voice Commands Settings
1. In standby mode, press and hold the key to launch Voice
Commands.
2. When the Say a Command screen appears in the display, press the
Settings (right) soft key ( ). The Settings menu appears in the display
showing the following options:
• Voice Activation List — Lets you set how Voice Commands activates the
names in your Contacts list.
• Sensitivity — Lets you adjust how sensitive Voice Commands is to spoken
commands.
• Time-out Period — Lets you select how long (in seconds) Voice Commands
waits for a spoken or keypad reponse to a prompt.
• Voice Launch — Lets you select how your device will launch Voice
Commands.
3. Use the Up and Down navigation keys to highlight the desired option, then
press .
Voice Activation List
Voice Activation List lets you set how Voice Commands activates the names in your
Contacts list.
1. In standby mode, press and hold the key to launch Voice
Commands.
2. When the Say a Command screen appears in the display, press the
Settings (right) soft key ( ).
3. Use the Up/Down navigation keys to highlight Voice Activation List, then
press . The following options appear in the display:
• Automatic — Voice Commands automatically activates/re-activates your
Contacts list the first time you launch Voice Commands after turning your device
on or after making changes to your Contacts list.
• Manual (Off by default)
4. Use the Up/Down navigation keys to highlight the desired option, then
press .