Activating your device, Install the battery, Turn your device on – Samsung SPH-A513BKASKE User Manual

Page 8

Advertising
background image

8

Activating Your Device

Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
device supports.

Install the Battery

Note: Your device comes packaged with a partially charged rechargeable standard Li-Ion battery and travel

adapter.

Important!: You must fully charge the battery the first time you use your device, otherwise you could

damage the battery. You can use your device while the battery is charging, but the battery will
take longer to recharge.

1.

Slide the battery into the compartment so

that the tabs on the right side of the
battery align with the slots on the side of
the device’s battery compartment.(1)
Press the battery down until it clicks into
place.(2)

2.

Replace the battery cover with the tabs

pointed toward the bottom of the battery
compartment (3), then press down (4)
until the cover clicks into place.

3.

Make sure that the battery is properly

installed before switching on the device.

Turn Your Device On

1.

Open the flip on your device.

2.

Press the

key.

Note: As with any other radio-transmitting device, do not touch the

antenna (located at the bottom of the handset). Using your device
like this can affect call quality and can cause the device to operate
at a higher power level than is necessary.

3.

The device begins searching for a network

signal.

4.

Once the device finds a signal, the current time

displays on the upper, right side of the icon bar.

3

4

Press

Antenna

Advertising