AVE Video Serial Synchronous ATM Interface VSSI-PRO - Manual (Page 23)

23
PROGRAMMING THE VSSI-PRO
VSSI-Pro VIDEO SERIAL ATM INTERFACE
DISPLAY LINES
Choices: 1 through 11
You have the choice of how many lines of text to display on-screen for register transactions. The choices are
1 through 11. Press the “Up” or “Down” button to move the cursor to “DISPLAY LINES” and press “Set”. The cursor will
begin flashing. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is
displayed.
NOTE
" " " " "
All ATM transaction data will scroll up regardless of the number of lines you choose to
display on-screen. The more lines you display on-screen, the greater the amount of time
that the transaction data will take to be recorded. However, some applications may limit
the number of lines and the size of the on-screen display. Note: If you are using an on-
screen title, it will occupy Line 1, leaving 10 lines for the text insertion.
LINE COMPRESS
Choices: ON, OFF
The VSSI-Pro automatically compresses the spaces in a line first as it reaches 20 characters. With LINE COMPRESS
on, the VSSI-Pro will additionally remove multiple spaces and vowels from the text to further compress the display as
necessary. Press the “Up” or “Down” button to move the cursor to “LINE COMPRESS” and press “Set”. The cursor will
start flashing. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is
displayed.
LEFT JUSTIFIED
Choices: ON, OFF
When LEFT JUSTIFIED is on, the VSSI-Pro will start each line of text with no leading spaces from the left margin of the
text display block. Press the “Up” or “Down” button to move the cursor to “LEFT JUSTIFIED” and press “Set”. The cursor
will start flashing. Press the “Up” or “Down” button to toggle between “ON” or “OFF” and press “Set” when the desired
value is displayed.
SCROLL DELAY
Choices: ON, OFF
Scroll delay ensures that lines of text remain on screen a minimum of 0.5 seconds. This is especially useful with ATMs
that run at a high baud rate, time-lapse VCR’s or DVRs in extended record modes, switchers, or multiplexers. Some-
times the ATM can produce characters so quickly that they can scroll up too fast on the screen to be recorded.
When SCROLL DELAY is on, the VSSI-Pro slows down this data feed just enough to insure that each line of text is
recorded. Press the “Up” or “Down” button to move the cursor to “SCROLL DELAY” and press “Set”. The cursor will start
flashing. Press the “Up” or “Down” button to toggle between “ON” or “OFF” and press “Set” when the desired value is
displayed.