AVE Video Serial Synchronous ATM Interface VSSI-PRO User Manual
Page 48
48
Key Definitions :
UP/DOWN
_ _ Change value
SET
_ _ Enter change mode
save change
Go to Position
UP AND DOWN
_ _ Save string input
UP AND SET
_ _ Erase character
Figure 65: HELP Sub-Menu
HELP
A helpful reference of key terms used in programming your VSSI-Pro.
DOWNLOAD/UPLOAD SETUP USING A PC
You can use a Laptop PC and AVE’s IC or equivalent communications program to store data from a VSSI-Pro to a file.
This file can then be uploaded to other VSSI-Pro units with the same software revision level. Use 4800 baud for the PC’s
baud rate.
PROGRAMMING THE VSSI-PRO
NOTE
"
"
"
"
"
For locations or companies with a large number of interfaces, we strongly advise that you
keep one programmed VSSI-Pro as a master and a backup to insure your system integrity.
This will also aid in reprogramming any changes and protect against any catastrophic
events.
Table 4: Triport Pin-Out
DB-9
DB-25
VSSI-Pro
(Serial Port)
(Parallel Port)
2
3
2
3
2
3
5
5
7
The count will end at 100. When this prompt clears the screen, the data transfer is complete. Press “Reset” to exit this
menu on both VSSI-Pro’s.
Now go to the main-menu of the previously UNPROGRAMMED VSSI-Pro on the right side of the screen. Enter the
EXCEPTIONS menu. You should see your exceptions and other programmed data just as they were on the original
PROGRAMMED VSSI-Pro.