AVE Video Serial Synchronous ATM Interface VSSI-PRO - Manual (Page 30)

30
VSSI-Pro VIDEO SERIAL ATM INTERFACE
PROGRAMMING THE VSSI-PRO
Figure 35: VIEW EXCEPTIONS Display
11:09:45A 9/12/05 MON REC
11:09:45 A 9/12/05 WITHDRAWAL150.00
11:13:12 A 9/12/05 GDSFDFDFL000
11:20:23 A 9/12/05 WITHDRAWAL250.00
**** END OF EXCEPTION ****
12-09-2005 11:30:05
Example:
Define “WITHDRAWAL” as an exception string in Exception No. 2 with the DISPLAY “ON” and define RANGE “100.00-
1000.00” and define OPERATOR ”IN”.
Figure 36: DVR SELECTION Sub-Menu
DVR SELECTION
Press the “Up” or “Down” button to move the cursor to “DVR SELECTION” and press “Set”. The following sub-menu
will appear:
Figure 37: DVR-3011.3021 Sub-Menu
DEST ID 1
SCR ID 1
EXIT
The default setting is “NONE”. If there is no DVR connected to the VSI-PRO, keep this selection.
DVR-3011 / DVR-3021
Press the “Up” or “Down” button to move the cursor to “DVR -3011.3021” and press “Set”. An asterisk appears to indicate
your selection.
NONE
DMS-3001
DVR-3011.3021
EXIT
NOTE
" " " " "
For any exception you must program DISPLAY “ON” for any exception data to be saved
in the Exception History.