Adaptec Ultra Wireless WirelessTM USB Adapter - Manual (Page 40)

33
Changing the Set-up of Your WLAN
Choosing an Access Point
You can choose to connect to a specific AP from a list of all APs
currently available to your Wireless USB Adapter. You might want
to do this if you want to connect to a different WLAN.
To connect to a specific AP:
1 Open the Adaptec Wireless Utility. See Step 1 on page 28 .
2 Click the Site Survey tab.
Available APs are listed. Click Search to find more APs, if
required.
3 Click on your chosen AP.
4 Click the Link tab and ensure that the AP’s signal strength and
link quality are acceptable.
5 Click Connect.
Once the connection is made, the Adaptec Wireless Utility
opens the Link Status page, which shows you the connected
Wireless network.
6 Click OK to close the Adaptec Wireless Utility.