Allied Telesis AT-GS950/48 - Manual (Page 251)

AT-GS950/48 Web Interface User Guide
251
Figure 95. Modify Policy Page
4. Change the parameters as required. You cannot change the policy
index number from this page.
Note
See “Create a Policy” on page 245 for definitions of each parameter.
5. Click Apply.
The modified policy entry is displayed in the table at the bottom of the
Policy Settings page.
6. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Delete a Policy To delete a policy entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Policy Settings.
An example of a policy entry on the Policy Settings page is displayed
in Figure 94 on page 249.
3. From the Policy Settings page, identify which policy entry that you
want to delete and click the Delete button in the Action column.
The policy entry is deleted from the policy table.